|
FIBERGLASS PRE-FORMED FITTINGS AND ELBOWS
Molded pipe fitting insulators are molded in two matching half sections, using fine, inert fibered glass of uniform density, utilizing a thermosetting resin. Sections match as premolded units with no handwork, and are resilient and light in weight.
|
 |
|
APPLICATIONS:
Premolded fittings are designed to insulate heating, cooling, or process piping systems operating at temperatures from -20° to +650°. The fittings are normally applied by placing two premolded matching half-sections over the pipe fitting, and joining them together using tape, wire, or adhesive. After being joined, the fitting is ready for jacketing, vapor barrier coating, or other finishes. |
When ordering please specify the following:
1. Type of material to be used (Fiberglass or Mineralwool)
2. Type of fitting (90°, 45°, Tee)
3. Thickness of Insulation needed
4. Type of Elbow (Screwed, Weld, Copper Tube)
*AVAILABLE IN FIBERGLASS OR MINERALWOOL
|
